Saab owners who lost their keys to their car could be concerned about the expense and inconvenience of adding an additional key. Fortunately, there is a way to cut down on these expenses by making your own key fob.
To do this, you'll need a flathead screwdriver. Put the flathead screwdriver into the slot that is located in the middle of the case and then slowly open it.
Cost
Some used cars only have one key, and the majority of SAABs have two keys. In this scenario the owner has to purchase an additional key, which is costly. There are several options to cut costs in this process. For saab 93 key programming , if you only require a replacement for your key fob case, you can save money by purchasing a used case at the dealership. These cases do not include the emergency badge or key, and they are prone to wear out quickly.
You also have to pay for the installation and programming of the TWICE module. These costs can quickly add up, especially if you don't have a spare.
It is essential to have two keys for your vehicle. If you lose the only key, you will not be stranded with no transportation.
The good news is that adding another key to your Saab 9-3 doesn't have to be as difficult as it might seem. The only problem is that you have to pair the key with the car's computer. This can be done through an authorized dealer, but it could take a while to make an appointment. You can easily find the necessary information on the internet to aid you in the process.
Installation
The majority of Saab cars manufactured after 1995 have an immobilizer that makes use of a key-fob for controlling the car's engine. This system also controls door locks and remote functions of the car. It is vital to keep a spare key on hand to prevent losing the original and causing your car to be stolen. The positive side is that if you lose your primary working Saab key you can replace it without the need to pay for the expense of a dealer service.
First, you need to prepare the new key fob. It is done by using a flathead screwdriver to pry the case open. Insert the screwdriver into the small slot in the center of the case and gently move the screwdriver. If you're having trouble, try using different angles. After you've opened up the case, you can take out the electronics and put them in a fresh fob case.
You can begin the programming process once you have the fob and key replacement. You'll need to hook up your Tech2 and follow the steps for the NG 9-3 (with or without a key). It is recommended to use a replacement unit TWICE that has been fitted with the correct key and transponder. You can find this unit on the internet. However, you must be sure to use an OEM replacement.
Programming
Tech 2 Tech 2 is required to include an additional key in the Saab 9-3. This also requires programming the vehicle to recognize the new keys. This process is much more complicated than simply copying the metal key, and should be handled by a professional in order to avoid damaging the vehicle's electronic system. If you're thinking about adding a spare key for your car, you should try to do it as quickly as you can. In the event of delay, it could result in higher costs in the future.
In addition to putting in the replacement key, you'll need to replace the TWICE or CIM module. It's a mail order process and is not something you can purchase from an aftermarket vendor. Depending on the model of your car the price could be quite high.
There's a solution to the dealer charging you top dollar to replace the car computer. S.A. Locksmith Security can RE-Program the EEPROM in your Saab computer and prepare the vehicle for the new key, saving you the expense of a brand new car computer! This service is quick, simple and affordable. It can save you up to 50% or more in comparison to what a dealer would charge you! This is an excellent solution for people who have lost their car keys.
Remotes
The Saab 9-3 Viggen is among the most unique vehicles ever to wear the Saab badge. It was an Scandinavian, front-drive fighter jet-inspired beast that was incredibly fast and enjoyable to drive. Although many other Saab models were built after it, they were not as unique.
It's important that you change your Saab 9-3 key fob when you lose it. Saab vehicles have an immobilizer feature, which requires a unique key in order to start. If you have a spare, the replacement process is fairly simple. But if you don't, it can be costly and time-consuming.
You can save money by purchasing a used replacement key fob and having it programmed by a locksmith local to you. Be careful when buying used keys on eBay or other online retailers. They may not be genuine and you may end having to pay more in the end.
Removing the electronics and battery from the old key fob is an easy procedure that anyone could do using a small screwdriver. Be careful not to scratch any of the tiny electronic components that are inside the case. You should also be careful not to pour liquids onto the inside of the case, because it could cause damage. In addition, you should not buy a cloned key from any aftermarket sellers because they may not be paired with your car's CIM.
