Double glazing refers to panes of glass within frames for windows or walls opening. The window glass can be damaged and requires repairs.
If you've noticed condensation between the windows or a noticeable draught, or hinges or handles are becoming difficult to open These are all indications that your double-glazed unit needs to be repaired. This repair usually involves replacing the entire unit.
Web Site glazed windows consist of two glass panes that have an air gap which is filled with inert gases such as argon or krypton. This helps keep heat in your home and prevents cold drafts from getting in. Sometimes, windows can become damaged, and the whole window may need to be replaced. It is crucial to contact the company who sold you the double glazing in the event that you spot a chip or crack in the window.
A few easy steps can be used to repair a broken window pane, but it is not recommended you attempt repairs on your own unless you are an experienced DIYer. First of all you'll need to put on some gloves and carefully remove the damaged pane. If the pane is cracked, use masking tape in a crisscrossing design to the cracks. This will prevent the cracks from becoming worse over time, particularly during the winter. You should also protect your work area with newspapers to prevent any broken pieces from falling. Once the damaged pane is removed, scrape away any glazing putty or glazed window seal with the help of a putty knife. Then, remove the glazing points with pliers. Finally, paint the bare wood with a fast-drying primer.
If you are able to purchase a replacement pane you can measure the length and width of the grooved channel with a tape measure. Subtract 1/8" from both measurements to take into account the slight movement of the replacement pane. Then, slide the replacement pane in place and then roll thin pieces of glazing compound in the channels with grooves. Tap gently using a Hammer at 6'' or 8'' intervals to aid in setting the glass in place Be careful not to break the glass.
It is a good idea to take advantage of your double glazing warranty to save the expense of a full replacement window. The warranty generally covers the cost of any component that you require replacing or repair, as well as the cost of labour. It is essential to verify the specifics of your warranty as it will vary from one company to the next, so make sure you are aware of what is covered and when.
Foggy Glass
Condensation in the panes of your double glazing could cause foggy glass. This can be due to various reasons like temperature fluctuations, incorrectly installed frames, or even the ageing seals.
In most cases, double glazing installers are able to repair this problem quickly and easily. It is essential to contact the company that installed your windows immediately if you notice any issue, and write a note. It will be easier to reach out to the company if you need to contact them later. This is especially helpful if your warranty or guarantee covers the issue.
It is possible to resolve the problem by replacing the seals on the gaskets. This will not require you to replace your entire window unit. It will help keep your home efficient in terms of energy use. To do this the window glazier needs to take off any retaining clips or strips that keep the IGU in place and then cut through the sealant using a saw.
They'll then construct or purchase a new IGU that will fit the frame, and then they'll apply special sealants to ensure it's air - and watertight. After they're done with the installation, they'll put in retaining clips or strip them and apply more sealant.
If you're lucky, the misting may cease after this. It's important that your frames are properly ventilated to stop moisture from building up in your ceilings or walls.
Double glazing owners also report that their doors and windows are difficult to open or close. This may be due to extreme weather conditions, or because the frame has become sagging over time and is not in line with the rest of your home. If this is the case, you can try wiping the frames with cold water in order to shrink them a little - however, it's unlikely to solve the problem completely. If you aren't able to get the problem to go away, you may require replacing them by a professional.
Condensation
Condensation occurs when the insulating gases in double-glazed windows fail to hold their place leaving air and moisture between the panes. This is more common in winter when humidity levels are higher. However it can also occur at other times. Moisture build up can lead to mildew and mould on sills windows, sealants and window frames that are not only unattractive but also harmful to your health. The good thing is that condensation can usually be resealed by a window professional to help reduce moisture in your home and stop the build-up of moisture.
Window gaskets are an important element of any double-glazed windows or door. These gaskets help to seal in the insulated air between your window glass and stop drafts, heat and moisture from entering your home. These gaskets may shrink or become brittle as a result of changes in temperature, weather conditions, and the aging process. You might notice condensation on your double-glazed doors or windows.
This can be repaired however, it will require replacement of the "sandwich" (thermo-pane and glass) in your double-glazing window. If you do not have the appropriate tools for the job, it is recommended that you have a professional re-seal your double-glazed windows.
Another common problem is mist that occurs between double-glazed windows. This is difficult to resolve. This is a sign that the vacuum seal in the factory has failed and there is no way to let air into or out of the sandwich.
A professional will reseal your window using the same process as they would with a condensation or fog problem. This typically involves removal of the thermo-pane sandwich and spraying it with a cleaning solution and then sucking the sealant out of the old. It is essential that you take measurements of the sandwich in terms of length, width and thickness. This will ensure that the new one fits perfectly and that the new seal is drawn.
This is a tough job that requires tools that aren't typically found in DIY stores. It is recommended to delegate this job to professionals, as incorrect seals could lead to mold and damp in your home. This could be costly and dangerous to your health.
Water Leaks
It's important to take action as soon as you see water leaking from your double-glazed windows. If you don't act quickly, even the smallest leak could become a major issue.
Sometimes, the window frame itself can be the culprit. Make sure that the sill pan, the flat base of the window frame, is sloping so that water is able to drain away from your home and not into the frame. If you find that the sill pan is not properly pitched or you see water in the wood, you should consult a double-glazing repair company.
A damaged window seal is a common cause of leaks. This can be caused by age, damage or weather. It's not as simple to fix, and is generally best left to the experts.
This could lead to lower efficiency of energy. This can also allow cold air to enter your home during the winter months and hot air to escape in summer. This can lead you to high heating and cooling costs.
It is easy to fix by applying a fresh layer of caulking. While it is possible for people with some DIY abilities to do this on their own it is generally much more efficient to let a double glazing specialist handle it for you. You will have peace of mind and an assurance that the work was done properly.
Some double-glazing windows come with warranties of up to 20 years. It is best to contact the company that sold you windows to determine the warranty they provide and how long it lasts. You can avoid the expense of replacing double-glazed windows in the future. If your double-glazed windows are covered by a warranty, it is crucial to report the problem when you discover any problems. You can do this online or by contact them directly. This information is useful if you need to use the warranty.
