Toyota key fobs have a transponder chip to ensure your car is secure. They also have batteries that have to be replaced every now and then.
It is costly to replace and reprogram a Toyota keyfob. TFS's Key Replacement Protection is one of the newest products it has developed to cut down on this expense.
Keys lost or damaged
Toyota has been using transponders into its remotes and keys for cars since 1998. This technology helps protect your vehicle from hot-wiring and other types of theft. However, when your key or fob gets lost or stolen you'll have to connect with a professional locksmith or Toyota dealership. This is because the procedure to have a replacement fob or key made is programming it with your vehicle's immobilizer system.
Replace the battery in case your Toyota remote or key starts to malfunction. To do this, you must open your key fob with your key (Newer models) or an object that is thin and sturdy in the designated notch or slot on the side of the case. When the case is opened, gently lift the circuit board to reveal the battery. Then, remove the battery that was in place and put in a fresh one, then close and test the key fob.
If the key isn't starting the engine and is not working at all, it could have a problem with the transponder chip that is inside it. If the chips are damaged in any way, it needs to be reset. This can only be done at an authorized locksmith or dealer, and will require some special tools that are only available to them.
Early models of Toyotas were not able to update the computer in the engine with new keys or erase old ones using the standard diagnostic equipment. The only solution to fix this was to replace the computer, or in technical terms, "reflash" with new data. This is the same procedure similar to formatting your computer's hard disk.
Toyota's most recent technology is designed to provide security and convenience, but increases the cost of replacing an item that has been damaged or lost. To help alleviate the financial burden, Toyota Financial Services is launching the brand new Key Replacement Protection. The plan will pay for the replacement key or fob for up to $800 per event. The plan is able to be purchased as an individual product or added to an existing auto loan.
Lockout Situations
When your car's power doors locks aren't working, you may have a big headache. They are designed to keep thieves out of your vehicle. There are a few simple solutions to these issues to ensure that you don't get locked out of your vehicle.
If you are unable to lock or unlock your doors or trunk when you press the buttons on your key fob, this could indicate that the battery needs to be replaced. It's fairly simple to replace on most Toyota models, and extremely inexpensive. Choose more info that matches the model of the key fob. Also, note the type of case and the manner in which the circuit board is positioned inside.
Open the case gently using a thin, yet strong tool like your key (Newer Models), or a coin or flat screwdriver. You should be able to see a slot on the side of the key fob case that you can use to insert the tool. After opening the case you can remove and locate the old battery. Take a photo of the model and position of the battery before replacing it. Carefully place the new battery.
It's a good idea in the event that you lose your key or it's damaged, to make a duplicate or give it to someone else. In the event that you are locked out of your car and they are unable to help, they can provide you with another set of keys or help you get back into your car with a slim key.
While it's possible to reprogram a blank fob from home, there are many situations where you may have to visit the dealership to get a Toyota key and fob programmed and replaced. This can cost between $200-350 depending on the Hilton Head Toyota dealership and parts specials It's crucial to know what options are available. If you do not have an extra car key or if your car has been stolen and you can't find a replacement the Key Replacement Coverage from Toyota Financial Services will help pay for the cost of getting you on the road.
Keys that were stolen or lost are not found
The key fob that you have for your Toyota vehicle is not only an actual key, but also has an embedded chip that sends an electronic signal to the car when you start or start the engine. If you lose your keys, obtaining an alternative can be difficult and expensive. Keep your spare Toyota car key in your pocket.
If you don't have a spare key, the next best option is to visit an automotive locksmith that is skilled in repairing key fobs for a variety of brands. If you have your car's registration and title they'll usually make a new key for you onsite and then program it into the car. This will likely be less expensive than going to an agent, who might require you to purchase the key before pairing it with the car's electronic system.
Make sure to check your warranty or insurance policy for coverage of the cost of a replacement key fob in the event that you've lost or stolen Toyota keys. You can also determine whether your local auto service center offers Toyota key replacement and programming services.
A dead battery is the most frequent reason for a Toyota key fob not working. You can buy a new battery for your Toyota key fob online or in most Freehold stores. It will cost less than $5. You should make adjustments to your key fob prior to installing the new battery to ensure the connections are clean and that the battery is installed properly. If it still doesn't work call your local Galaxy Toyota service department for help.
To avoid having to replace your Toyota's key fob in future, consider a brand new key protection product offered by TFS/LFS as well as Safe-Guard Products International. Toyota Key Replacement Protection will assist those who have lost or damaged their key fobs stolen by providing a replacement.
Transponder Chip Issues
Some models of cars manufactured after 2000 incorporate a transponder chip to prevent car thieves from stealing the engine's hot-wire. This cool technology is incorporated in a tiny plastic part of the key that appears like a regular physical key. When you insert a chipped key into the ignition barrel of your car, a radio frequency energy is captured by a coil around the transponder. The chip then sends an electronic signal to the car, which contains a unique serial number. The computer in the car compares the number with the one it has stored in its memory and if they match, the car will start.
Transponder chips are susceptible to fail due to a variety of causes. This can be due to extreme cold and extreme heat, water damage or a damaged car key fob. If you're experiencing one of these issues, it's important to contact a professional auto locksmith away.
A key fob equipped with a transponder is less durable than a mechanical key. It's more vulnerable to wear and tear. This could result in the buttons becoming worn out, or the electronic components failing. You will need to replace your key fob if you experience this issue, not only the button or two.
In certain situations your key could require a new battery. This is a quick and inexpensive fix that can solve the problem. You can purchase an updated battery at the local auto store or on the internet.
You can also clean the buttons on your key fob to see whether this helps solve the problem. It's recommended to avoid dropping the key fob onto hard surfaces, because this could cause damage to the internal mechanisms. Submerging your car keys in the water can short-circuit its electronics which can cause it to malfunction.
If you are looking to replace a key fob with a transponder, ensure you purchase a genuine key from your Toyota dealership or a trusted locksmith for cars. Duplicate keys purchased from hardware stores are not a good idea, as they don't come with the right software to match your specific model. The keys could damage the chip in the key, and may not be able to activate your vehicle. A reputable auto locksmith or your dealer in the car has the right tools and know-how to properly program a transponder key.
