If your Toyota key fob isn't operating properly, you may need an alternative battery. It's easy to do by opening the case and inserting a flat device such as a screwdriver. Remove the battery carefully, and then replace it with a brand new one.
While this isn't a complete solution, it can aid you in getting back on the road. Contact us if you have any questions about our Key Replacement Protection, which is included in our Tire and Wheel Protection plan.
Finding a Replacement Key
We all lose our keys at one point. Sometimes, it's as simple as returning to your steps and looking for where you normally set them. Sometimes, you might have a more serious problem, such as the key fob isn't working or even worse even lost completely. If your key fob won't function, it might require a new batteries or changing the programming. There are several things you can do to find a Toyota key replacement for your car, truck or SUV.
The first step is to determine if the key has been lost. If it's lost, you will have to bring an empty key to your local Toyota dealer and get it cut. You'll need proof of ownership, like your registration or insurance card. If you do not have any of these, the dealer will need to determine your key code using the vehicle's VIN number. This will stop thieves from hot-wiring the vehicle and then stealing it.
You can use an app to locate your key. The Toyota Key Finder app is available for the majority of the latest models from the brand, and it makes use of Bluetooth(r) technology to let your key emit signals that can be detected by the app on your tablet or smartphone. The signal is strong enough to be detected by your phone, but it isn't enough to cause interference with other devices at home or at work.
Alternatively, you can bring your key fob to an electronics store or automotive parts supplier and request that it be replaced. These places can often program a new Toyota key and will have the part in stock. You may also have to show some form of identification, based on the location and policies of the store.
To ensure proper fit and performance, use OEM parts when replacing a Toyota Key Fob. It is recommended to purchase the component directly from the manufacturer since it is made for your specific car model and year, and is in compliance with the highest safety standards.
Replacing the Battery
If your car's battery has died or you notice a slowdown in the way your key fob responds to a button press it could be time to replace one. A new battery will stop the slowness, and your car should be able to start faster in cold weather or after a long parking lot stay. Follow these simple steps to replace your battery.
Close the hood, shut off the engine, and set the parking brake. The battery is usually placed on a tray in the front of the engine compartment. There will be two terminals one black (negative) and one red (positive), where the cables are attached.
Use a wrench to tightens up the negative cable connector on the terminal of the battery. Remove the cable and terminal. Be careful not to drop the battery, which could cause it to leak or explode. Set the battery aside making sure not to scratch the electrical wiring or any other parts in the engine bay.
Before putting in your new battery, make sure you apply anti-corrosion solutions on the terminals of the battery and the tray for your battery. This will stop corrosion and will help make the new battery last longer.
When you're ready to install the new battery then find the clamp or mounting plate which secures it. The positive terminal on the battery must match the positive terminal on the mount or clamp. Place the battery in the tray, and then reconnect the clamp or mount.
Repeat the process with the negative battery terminal and cable connector. Use a wirebrush to clean the connectors, terminals and clamps on the battery tray. Spray the anti-corrosion solution onto the negative and positive terminals of your battery to extend the life of your battery.
Replace the key fob
The key fob lets you to unlock or lock your car with a simple press of the button. However, if the battery is dead or the fob is damaged in some way, it can be difficult to get it to function correctly again. Luckily, replacing the fob is fairly easy and can be accomplished at home. Here's how:
The first step is to unplug your key from the fob. There should be a slot or notch where the key is inserted into, and it's helpful to carry a small, flat tool, like a screwdriver coin to help open the case. Older Toyota fobs might have a detachable key that you can use to do this, whereas the latest models are designed to be opened by inserting the key into a slot on the case.
After the case has been opened, locate the board and note where the battery is positioned (it's best if you snap a picture using your phone to serve as for a reference). Then, take out the battery that was in use and replace it with a fresh one. Consult your owner's guide or our service center for assistance when you're not sure of the type of battery your Toyota fob needs.
Close the case with care after installing the new battery and check your Toyota fob. If it's still not working then you can open the case and make sure that the battery is properly installed and that all connections are clean.
If everything is fine, you're ready to drive your Toyota with confidence again! If your key fob doesn't work after replacement, it's an ideal idea to call our service department for an inspection and repair. toyota keys replacement is available to help with all your automotive needs! If you're in need of the replacement of your key fob or a new transponder chip, we've got you covered. Contact us today to set up an appointment! We look forward to serving you.
Replacing the Transponder Chip
Transponder chips are present in a variety of modern vehicles. These chips communicate with the immobilizer system. This prevents unauthorized access to the engine and vehicle. If you lose your key fob, or it stops working, then you'll need to get the transponder chip replaced. This can be done by a locksmith, or at the dealership. A professional locksmith is more likely to have the proper tools for the job.
Find a blank Toyota Key and have it duplicated at a local locksmith. They'll have the proper equipment to complete this task at a lower cost than the dealership. You'll need a master-key to program the new key. The keys can be bought from a locksmith, dealer or on the internet.
The chip in the Toyota is held on with a split pin that is only accessible when the key is extended half-way. You can employ a screwdriver or any other tool you need to gradually remove the plastic from the inside of the key. It's a bit of a challenge but there are plenty of videos on YouTube to help guide you. Once the transponder has been removed, you can tape it temporarily. Then, insert the key with the chip removed back in the housing and clamp it down with a firm clamp. Seal the cuts with super glue if necessary.
Insert the master key into the ignition cylinder but do not turn it. Press and release the gas pedal six times within a period of 20 seconds after doing this. The security light should blink to indicate that the key is now registered.
Replace the battery and test the key fob to confirm that it's functioning properly. If it isn't, you need to open the case and check that the battery is properly set and the connections are in good order. If you're still having trouble, call a locksmith who is specialized in replacing keys for cars for a more secure solution. USA Lock Key can provide fast and efficient Toyota key services.
