Toyota key fobs are equipped with a transponder chips that keep your car secure. They also have batteries that need to be replaced from time to time.
Reprogramming and replacing a Toyota key fob is costly. TFS's Key Replacement Protection is one of the most recent products that it has designed to cut down on this expense.
Keys damaged or lost
Toyota has been incorporating transponders in its remotes and car keys since 1998. This technology safeguards your vehicle from hot-wiring and other types of theft. If your key or fob is lost or stolen, you'll have to connect with a professional locksmith or Toyota dealership. This is because the procedure to get a replacement key or fob created involves programming it with your vehicle's immobilizer system.
If your Toyota key or remote fob starts to fail, it's time to replace the battery. To do this, you must open the fob of your key using your key (Newer Models) or a thin and strong object at the designated notch or slot on the back of the case. After the case is opened, gently lift the circuit board to reveal its battery. Then replace the battery with a new one and close the key fob.
The transponder chip may be damaged when the key doesn't start the engine or works in any way. The chip needs to be reprogrammed in the event that it has been damaged in any way. This is only possible at an authorized locksmith or dealer and will require specific tools only available to them.
The early Toyotas were not able to update the engine computer with fresh keys or erase old ones using standard diagnostic equipment. The only solution to fix this was to replace the computer or, in technical terms, "reflash" with new data. This is the same process similar to formatting your computer's hard drive.
Toyota's latest advanced technology offers convenience and security but also increases the cost to replace the lost or damaged fob. Toyota Financial Services has launched the Key Replacement Protection to help ease this financial burden. replace toyota car key will pay for the replacement key or fob up to $800 per incident. The plan is available as a standalone product or added to your current auto loan.
Lockout Situations
When your car's power doors locks aren't working, you may be in for a major headache. They are designed to keep thieves from your car. There are simple solutions to these problems, so you won't be locked out of your vehicle.
If your key fob doesn't respond when you press the buttons on it to lock or unlock the trunk and doors it could be a sign that the battery needs to be replaced. This is fairly easy to do on most Toyota models, and it's extremely inexpensive. Just make sure you order an appropriate battery for the model of your key fob, and note the type of case it comes with and the way the circuit board fits inside.
Using a thin yet strong tool, such as a key (Newer Models), a coin or flat screwdriver, gently push the case open. You should be able to see a slot on the back of your key fob in which you can insert the tool. After opening the case, find and remove the battery. Photograph the battery's type and its location prior to replacing it. Replace the battery with care.
It's a good idea, in the event that you lose your key or it's damaged to make a duplicate or give it to an acquaintance. If you're locked out of your vehicle, they'll assist you with a slim-jim or provide you with a new set.
It is possible to reprogram the blank fob by yourself however in most instances, you'll need to go to your local Toyota dealership to have the fob and key programmed. It can cost between $200 to $350, depending on the Hilton Head Toyota dealer and specials. It's important to know the options available. If you do not have a spare car key or if your car has been stolen and you cannot find a replacement, the Key Replacement Coverage from Toyota Financial Services will help with the costs of getting you on the road.
Keys stolen or lost
The key fob for your Toyota vehicle isn't just a physical key, but also has an embedded chip which sends an electronic signal to the car when you begin or start the engine. If you lose your keys, getting an alternative can be difficult and expensive. There are fortunately a few ways to avoid this scenario, one of which is to keep an extra Toyota key in your pocket at all times.
If you don't own a spare key fob the next thing you can do is visit an automotive locksmith that specializes in replacing them for different brands. If you have your vehicle's registration and title on hand, they can usually make a new key for you onsite and then program it to the car. This will likely be cheaper than visiting an auto dealership, where you'll need to order the key and then connect it to the car's electronic system.
Another option for dealing with lost or stolen Toyota keys is to look up your car's warranty or insurance policy to determine if it covers the cost of a replacement key fob. You can also check whether the auto repair shop in your area provides Toyota key replacements and programming services.
A dead battery is the main reason for a Toyota key fob not working. You can purchase a replacement battery for your Toyota key fob on the internet or at many Freehold stores, and it should cost under $5. Before putting the new battery in, take apart the case that holds your key fob and adjust it so that the connections are in good order and aligned with the battery correctly. If it doesn't work after that, you can contact the Galaxy Toyota service department.
You should consider a new key protection product from TFS/LFS or Safe-Guard Products International to prevent the necessity for your Toyota key fob to be replaced in the near future. Toyota Key Replacement Protection will assist those who have lost, damaged or had their keys stolen by covering the cost of a replacement.
Transponder Chip Issues
Transponder chips are used in certain car models made after 2000 to prevent car thieves from hot wiring the engine. This innovative piece of technology is embedded inside a small piece of plastic of the key that appears like a regular physical key. When you insert a chipped key into the ignition barrel of your vehicle, a pulse radio frequency energy is absorbed by a coil that is positioned around the transponder. The chip then transmits an electronic signal to the car that contains a unique serial number. The computer inside the car will then check this number against the one stored in its memory and if they match, the car will start.
Transponder chips are susceptible to fail due to a variety of causes. The most common causes are extreme heat and cold as well as water damage or a damaged car key fob. Contact a professional auto locksmith immediately if you encounter any of these issues.
A key fob with transponder chips isn't as strong as a traditional mechanical key, making it vulnerable to more wear and tear. The buttons could begin to wear out or cause the electronic components to fail. It is necessary to replace your key fob if you have this issue, not just the button or two.
In some cases your key could need a new battery. This can be a quick and affordable fix, but it will solve the issue. You can typically get a replacement battery from your local auto store or online.
You can also clean the buttons of your key fob to see whether this resolves the problem. It's also a good idea to avoid dropping the key fob on hard surfaces, since this could damage the internal mechanisms. Don't immerse your car key in water as this can short-circuit the electronics and cause it to fail.
If you're looking to replace a key fob by a transponder, ensure you get a genuine key from your Toyota dealership or a reputable automotive locksmith. Duplicate keys purchased from hardware stores won't be compatible with your vehicle because they lack the necessary software to operate it. The majority of the time, these keys don't unlock your car and could even damage the chip inside of the key. A reputable auto locksmith or your dealer in the car will have the tools and expertise to correctly program a transponder-equipped key.
