If your Toyota key fob doesn't work correctly, you may need to replace the battery. This is easy to accomplish by opening the case and inserting a flat device such as a screwdriver. Remove the battery carefully and replace it with a brand new one.
This is not a complete solution, but it could help get you back on the road. If you have any questions regarding our Key Replacement Protection that is included in our Tire and Wheel Protection plan We invite you to contact us.
Finding a Replacement Key
We all lose our keys at some point. Sometimes, it's as simple as returning to your steps and looking for places you usually set them. In other instances, you could encounter a more serious issue for instance, the key fob isn't working or even worse losing it completely. If your key fob doesn't work, it could require replacement batteries or changing the program. There are several things you can do to get a Toyota replacement key fob for your car, truck, or SUV.
The first step is to determine whether the key fob actually been lost. If it has been lost, take a key blank to your local Toyota dealership and have it cut. You'll also need to provide some proof of ownership, such as your registration or insurance card. If you don't have these the dealer will need to determine your key code using the VIN number of the vehicle. This will prevent thieves from hot-wiring your vehicle and then stealing it.
You can use an app to find your key. The Toyota Key Finder app is available for most of the most recent models of the brand and it uses Bluetooth(r) technology to let your key emit a signal that's detectable by the application on your smartphone or tablet. The signal is strong and can reach your phone but not enough to cause interference with other devices at home or in the office.
You can also take your key fob into an electronics store or parts distributor to get it repaired. These places will often be equipped to program the new key for your Toyota, and they'll likely have the part you need in stock. You may be required to show an identification document as well, depending on your location and the store's policies.
To ensure proper fit and performance, use OEM parts when replacing a Toyota Key Fob. It is recommended to purchase the component directly from the manufacturer since it is made for your car model and year, and is in compliance with the strict safety standards.
Replace the battery
If the battery in your car is dead or you notice a slowdown in the response of your key fob to a button press It could be time for a new one. A new battery will stop the sluggishness and your vehicle will start more easily in cold weather or after a long parking lot stay. Follow these simple steps to replace the battery.
Turn off the engine, set the parking brake, and then open the hood. The battery is usually mounted on a tray at the front of the engine compartment. You will find two terminals where the cables are plugged in - a black one (negative) and one in red (positive).
Use a wrench on the bolt that will tighten the negative cable connector on the battery terminal. Remove the cable and terminal. Make sure you don't drop the battery, which could cause it to leak or explode. Place the battery in a secure location, making sure not to damage any electrical wiring or other components inside the engine bay.
Before putting in your new battery, you should also spray an anti-corrosion solution on the battery terminals as well as the tray that holds the battery. This will help to stop corrosion and help ensure that the battery will last longer.
Locate the clamp or mounting plate that holds the battery when you are ready to install it. The positive terminal of the battery must be connected to the positive terminal on the clamp or mount. Then, lower the battery into the tray and reconnect the clamp or mount.
Repeat the procedure for the negative terminal of the battery. Make use of a wirebrush to clean the terminals, connectors and clamps on the battery tray. Spray the ends of the positive and negative battery terminals with an anti-corrosion product to prolong the life of your brand new battery.
Replacing the Key Fob
The key fob lets you to lock or unlock your vehicle with just a push of the button. If the battery is dead or the fob is damaged in some way, it can be difficult to get it working properly. Fortunately, replacing the fob is simple and can be done at home. Here's how:
The first step is to remove your key from the fob. There should be a slot or notch that the key's metal part fits into, and it's beneficial to have a small flat tool with you like a screwdriver coin to open the case. You can make use of a detachable Toyota key to open older models, but newer models require you to insert the metal key into a notch.
Once you have the case open then locate the circuit board and note where the battery fits inside (it's best to snap the photo using your phone to help you identify). Remove the old one and replace it with a brand-new one. Refer to the owner's manual or our service center for assistance if you are unsure of the kind of battery that your Toyota fob needs.
Close the case with care after installing the battery and test your Toyota fob. If it's still not working then open the case and double-check the battery's installation and that all connections are clean.
If everything checks out then you're ready to drive your Toyota with confidence! If your key fob isn't working after replacing it is an ideal idea to call our service department to have an inspection and repair. Our team is prepared to assist you with any of your automotive requirements. If you're in need of a key fob replacement or an upgrade to your transponder chip, we've got you covered. Call us today to set up an appointment. We are looking to working with you.
Replace the Transponder Chip
Transponder chips are found in a lot of modern cars. These chips communicate with the immobilizer system. This prevents unauthorized access to the vehicle and its engine. You'll need the transponder chip to be replaced when you lose your keyfob or if it stops working. This can be done by a locksmith, or at the dealership. A professional locksmith will have the appropriate tools to do the job.
Find a blank Toyota Key and get it duplicated by an area locksmith. They'll have the right equipment to do this at a lower cost than the dealership. You'll also require an master key to program the new key. These keys can be purchased from the dealer, locksmiths or on the internet.
replace toyota car key in Toyotas is held by a split pin, which is accessible only with the key in half-extended. You can employ a screwdriver or any other tool you're using to slowly take the plastic from the inner key. YouTube has many videos that can assist you. After the transponder has been removed, you can tape it temporarily. Then, put the key with the chip removed back in the housing and clamp it down firmly. Use some super glue to close the cut if required.
Insert the master key in the ignition cylinder but don't turn. Release the gas six times over 20 minutes. The security light will flash and indicate that the key is registered.
Then, you can replace the battery in your new key fob and test it to ensure that it is working correctly. If it doesn't, open the case and double ensure that the battery has been properly set and the connections are in good order. If you're still having trouble contact a locksmith who specializes in automotive key replacements to get a better solution. USA Lock Key can provide fast and efficient Toyota key services.
