Whether your home has vintage single-pane wood windows or energy-efficient vinyl double-hung windows, the right window repair company can assist. The company should offer an estimate free of charge and a guarantee for its work.
Some window companies offer lifetime warranties on frames, sashes and locks. Certain companies offer limited warranties that expire after a period of time.
Paint that has peeled or chipped
If the paint on your window frame begins to chip or peel It is the perfect time to apply a new coat. A properly applied interior paint can last about 5 to 10 years indoors, while exterior paint could last 7 to 10 years based upon climate conditions. Even the most effective paint application will wear down as time passes and exposure to the elements. Paint chips and peels occur as the result of wear caused by rain, sun and snow.
Peeling paint can expose bare wood, which can lead to moisture problems. A lack of caulking or a leaky seal could cause moisture issues in wooden window frames. If moisture is not addressed promptly, water may seep into the sill or frame and cause rot or mold.
To repair a glass that is peeling remove all paint by using a wire brush or scraper and sand to smooth rough edges. If a chemical stripper or heat gun is used, follow the manufacturer's instructions carefully to ensure that you don't damage the glass and timber frame. Paint the wood surface with an oil-based primer that blocks staining, then paint it with a high-quality enamel.
Examine the entire frame of your window to make sure that there aren't any signs of rot. Minor rot can be repaired using a high-quality wood putty. Some painters like to apply a waterproof preserver on the wood surface that is bare at this point, which helps to keep from future problems such as mildew or rot. However, this is not always necessary.
Coffee-Like Stains
When cleaning windows, people often encounter stains that look like coffee or tea. These stainings result from condensation, that occurs when warm air from the inside of your home comes in contact with cool windows or glass. This is a more frequent issue during winter as colder temperatures outside can cause the indoor air of your home to become warmer and humid.
There are many ways to remove these unsightly stains, without damaging the blinds and window sills. Start by removing dust and dirt with a non-scratch microfiber cloth. After soaking a clean, lint free cloth with water, place your cleaner to the window's surface by wiping it around and back. Repeat until you have removed the streaks.
If your stains are not removed, you may have to take a more aggressive approach. There are many abrasive cleaners which can take even the toughest stains from your glass without harming it. Steel wool, rough green sponges and a product called Magic Eraser are all popular options. The texture of the magic eraser is similar to that of very fine sandpaper. Follow the instructions on the label when using any of these products to ensure you don't damage your glass.
Another important way to prevent future hard water stains is to wipe your windows with a clean, lint-free rag or paper towel. This helps to remove the minerals before they have the chance to penetrate the surface of your glass and become difficult and costly to remove.
Water Damage
Over time, even most well-sealed windows may suffer water damage. The frames made of wood slowly degrading due to constant exposure to weather and moisture. In time, the wood will rot and cause serious issues. In a majority of cases, if the damage is not checked, you'll have to replace the entire window frame. However, if you spot the issue in its early stages, you can avoid costly repair costs.
Water stains are a common sign of water damage to your windows. They appear as circular or oval spots that are yellow, brown and white in colour. They are typically found in the corners of the window. They can be caused by a variety of factors, like sun or lack of it or a buildup in the sill pan.
Another sign that your windows have suffered water damage is the appearance of mold around the frame. Mold grows in areas with excessive moisture, and it could quickly spread throughout your home if not dealt with. Mold can cause health issues because it produces spores.
If you find that your window frames have begun to show signs of decaying texture, you'll need to call in experts to repair the damaged parts. In some cases it can go as that the drywall is sagging around the frame of the window. This can be a dangerous situation. In the meantime, you should be looking for other indicators of a window that are leaky, which will help you address the problem before it gets out of hand. You can detect the smell of musty damp wood or soft spots that feel spongy.
Frames that are Rotted
Water can cause wood to rot when it is placed in wooden window frames. Wood rot isn't only unsightly, but it can also create health problems for you and your family. If there is a large amount of decayed wood around your windows, it is likely time to replace them instead of repair them.
You can identify a rotted frame by its appearance. The wood will appear soft and discolored. It is also possible that paint has peeled off the wood surface. The best way to determine if rot has occurred is to feel the wood. Solid, healthy wood is firm and dense. Rotted wood will feel soft and mushy.
If the frame of your window is becoming rotten, you can take it off with the help of a Hammer. You must do this in a cautious manner to avoid damaging the surrounding areas. Once the rot has been removed, you must use wood filler to repair any cracks. Once the repair is completed, you should sand down the wood, and then apply several coats of waterproof wood sealer.
Window frames that are rotten can result in mildew or even mold, which can lead to various health issues. If you are sensitive to mold and mildew, you may experience symptoms such as stuffy nose and itchy eyes when exposed to these substances. If you have asthma, these symptoms can become much more severe.
When rotted wood is repaired, it's important to keep in mind that the repairs made using splices will allow more moisture to enter the frame than usual. This could lead to further problems like leaks or the deterioration of your window.
Muntins and Mullions
While the terms mullions and muntins sound similar and are often used interchangeably, these two windows have different purposes. When it comes to selecting new windows, it is important to know the difference between these two features so that you can select the most appropriate style for your home. The distinctions between the muntin and the Mullion can have an enormous impact on the appearance, functionality and historical authenticity of your window.
In essence, a muntin is a vertical divider that divides the glass panes in a window. However, site "muntin" is usually reserved for the windows' inner frames while the outer frames are known as stiles and rails. It could be that their similar alliterative sounds or their function as structural support components have led to their interchangeability.
Originally, mullions were designed to support large windows as the walls that surrounded older buildings were unable to support the weight. They were also able to provide a decorative touch to windows while helping the glass remain in place. Muntins and mullions serve only a decorative function.
There are a variety of muntins that are available including those constructed between the glass and into the actual units. These can be made of vinyl, wood or aluminum. They look like traditional multi-paned window without cutting down on energy efficiency. Some windows come with real and fake muntins to give them a more customized appearance.
