Secondary glazing is a cost-effective method to increase the efficiency of thermal energy and noise reduction of single-glazed windows that are already in use. Unlike replacement primary window units it doesn't require removal of the frames that are in use and is more suited to period properties.
A reputable company will be able to offer after-installation support. They may even call you after a few weeks to check how things are going. They should also be FENSA accredited and provide a warranty on the product.
Improved thermal efficiency
Addition of secondary glazing can help reduce heat loss, and eliminate drafts. It can also make your home more comfortable and quiet. But it's important to know that this type of solution isn't an alternative for triple or double glazing. It will only provide a modest improvement in energy efficiency.
Glass is not the best insulation however, an air layer or sometimes argon gas between two panes of glass can slow the transfer of heat from warm to cold and reduce condensation. A layer of insulation between two panes of glass in a double glazed window will stop cold air from getting into your home and will keep warm air inside your property.
There are a variety of systems that can be installed with a DIY kit and others require a professional installation. There are systems that fit sliding sash window frames as well as other frames that are already in place. Some slide open and close and close, while others are attached to the wall.
The most cost-effective type of secondary glazing is the 'lift out' system that is installed inside your existing window and simply lifts out of a secured channel. This is the most suitable option for a sash windows or when access to primary windows is restricted.
Based on the quality of the glass employed and the type of gap between the primary and secondary windows. Certain windows may have higher insulation levels than other. The greater the distance between two panes is, the better the thermal performance.
In some cases, adding secondary glazing to a home can increase its thermal efficiency up to a point where it can match the insulation provided by modern double or triple windows. This is particularly applicable to older homes, where planning restrictions restrict the kind of replacement window that can be installed. In double glazing repairs near me , secondary glazing may be the most cost-effective method to insulate windows with sash frames that are old.
Reduced noise
Windows let a lot of noise into the home. This is particularly problematic for those who reside near flight paths or rail lines. In these instances upgrading to a new double glazing can significantly reduce the impact of external sound on a property. Secondary glazing is a great alternative for those who are unable or don't want to replace all their windows. It involves fitting an additional window inside the frame of a house. This'secondary' window provides an additional (sealed) barrier that helps to protect your home from cold air, but also external noise.
Noise pollution can be an actual issue that can have long-term health consequences if not taken care of. Ecoease offers a low-cost solution to reduce the amount of sound from outside that could enter your home. Our second double glazing near me is a fantastic option for those looking to reduce noise pollution without spending the money to replace all their windows.
The main benefit of secondary glazing is that it creates an additional barrier between your home and the outside world, significantly lessening noise pollution. This is achieved by installing frames and a separate pane within the original window with the gap being around 100mm. The secondary window is not as large as the primary one, the secondary window can be closed and opened to provide ventilation.
This additional barrier helps to keep a room warm from cold air that could otherwise escape through the original windows and down the wall. This helps keep the room warm and decrease energy costs.
In addition to this the secondary glazing can help to reduce the level of noise created by traffic and other external activities. The additional barrier between your home and the outside world can be a significant comfort benefit and will add value to your daily life.
The system can be installed on virtually any type of window including awnings, sliding sash vertical windows and sliding doors. It can be fitted to individual windows or multiple windows in a home and is a much more cost-effective alternative than changing all of your windows. It also keeps the appearance of your property and could be a more sympathetic solution for listed buildings where the replacement of windows could alter their appearance.
Increased security
Some people assume that double glazing is a very expensive option, but it's not always the case. Secondary glazing is actually cheaper than you think, particularly if you consider its effectiveness as a security solution. In addition to offering insulation, it also serves as a second barrier that would be difficult for any burglar to break into. Secondary glazing is a better choice over replacing windows which can be a challenge in certain cases and may require permission to plan.
Unlike new windows, which can be fabricated to fit any house secondary glazing is designed to fit the inside of existing window frames. It's a straightforward and affordable solution that can offer several advantages. Additionally, it can improve your home's security overall by decreasing the amount of noise that can enter your home.
If you are in search of secondary glazing near me, you should consider the quality of the products and the service provided by the installers. Make sure to ask about their insurance certificates, accreditations, and guarantees. Also, you should consider how long they have been in operation. Experienced companies will ensure that work is completed efficiently and in a timely manner.
Secondary glazing offers the main benefit of cutting down on heat loss and improving the soundproofing of draughts by creating another window behind the existing windows. This second pane is an insulation layer that reduces heat loss, and also reduces the intrusion of noise. It's also a cost-effective way to upgrade your windows without having to replace them all.
If you have single-glazed windows in your older home you're likely to spend a lot on cooling and heating. Glass is a great conductor of heat. This means that you're losing electricity or hot water through your windows when trying to stay warm in winter.
The best way to deal with this problem is to invest in secondary glazing. This kind of window treatment is much cheaper than the installation of a brand new window unit and will give you a host of benefits, such as better insulation, lower energy bills and enhanced security. You can select from a range of styles, such as hinged units or secondary glazing that lifts out.
Improved appearance
One of the main concerns of homeowners is the effect replacing their windows would impact the appearance of their house. It is possible to get the energy efficiency of modern double glazing without altering its appearance of the property by installing secondary glazing instead. Installation is much simpler than replacing original windows, and can be completed much quicker.
The process involves an individual pane and frame positioned on the inside of the window, typically leaving a gap of around 100mm between them. This acts as an obstacle to heat loss and the rubber seals aid in separating the space from the window and minimize the transmission of sound. It can also be used to improve insulation in period buildings where planning restrictions restrict the use of double-glazed units.
There are a variety of styles of secondary glass available to meet your needs. They range from glass that open like windows to those that are fixed to frames of sash. Some secondary glazing systems are designed to be as discreet as they can and have frames that are completely hidden and unobtrusive on the inside. They are especially beneficial in situations where regular ventilation is required. opening the sash can cause danger to health and safety if a large amount of wind is blowing into the building.
Certain companies offer permanent secondary glass made of aluminium that is affixed to the exterior of your current window, resulting in more energy efficiency and a more modern look. This is ideal for historic or listed buildings and can be an economical option if you are limited by budget. You can choose the woodgrain and color to match the home to make it appear as if it's been there for a long time.
Whatever kind of secondary glazing you choose, it is important to choose a business with experience in the type of home you want and has a great reputation for customer service. It is also worth checking online reviews and asking for suggestions from your friends and family. Check if the business is registered with professional associations like the Glass and Glazing Federation.
