uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.
For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.
Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they could be trampled on and cause further damage.
After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. Over time, they can develop a variety of issues that include sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from getting worse.
Repositioning the hinges can aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in the right position.
If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.
uPVC handles may also become loose. This is typically caused by screws that have become undone over time, but it can be caused by the handle mechanism wears out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then return the mechanism to its original its original position.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.
This is an easy fix that can be accomplished by any DIYer who is competent. Depending on how severe the problem is, the old caulking may need to be removed. When it comes to uPVC repair, you must be careful not to over-caulk. This will make your window harder to clean and reduce its energy efficiency.
It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.
Mold spots and rotten sills are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.
It is also important to note that if the leak originates from the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and open with a breeze It could be hinges at fault. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.
Most households in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do when you have a person to assist in holding the frame in place.
Verify that the uPVC hinges are open and closed in the proper direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.
Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to provide assistance.
It is also important to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this causes an opening to appear between the sash and the frame. This can be easily repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to have them realigned or replaced. window repair near me , which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a thorough clean, however in some cases it might be necessary to have them replaced.
These seals can wear down or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.
Another method of reducing drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking cold air.
Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a life span and there may come a point where it is more economical to replace them than repair them. If you have any problems with your window made of upvc it is recommended to speak with a professional immediately.
