Double glazing is a fantastic investment in energy efficiency. It helps prevent loss of heat in the winter months and helps keep your home cool in summer. Repairing your double-glazed windows whenever necessary is a great way to ensure they remain in good condition.
Over time, your double-glazed windows may suffer from issues such as condensation and misting. Double glazed windows can be difficult to open and close.
Broken Panes
A stray ball or a flying pebble from your lawnmowers or even a severe storm could break the double panes of your windows, leaving your home exposed to the elements. While a damaged glass window isn't easy to fix however, it does not need to be replaced. The insulated glass that is between two panes of glass is still in good shape and you can fix your double-paned window on your own.
First, you'll need to remove any broken glass from the frame. This is a messy job, and you'll want to be cautious to prevent any glass fragments from falling on the floor or falling out of the frame. Wear work gloves to protect you hands, and an abrasive cloth around the damaged glass to avoid further cuts or damage. After removing related broken piece, carefully clean the entire frame of the window to eliminate any remaining sealant and debris. Sand rough areas of the frame to create a smooth and even surface to install your new glazing.
After the frame has been cleaned, you can apply a fresh layer of glazing to the place where the broken pane was removed. This is the best method to seal and protect your window, and will save you money by preventing water and drafts from entering your home. The next step is to choose your glazing material. There are several options available, including clear tape which is more durable than regular tape and can keep your window secure from further cracking, as well as glazing film that is similar to clear plastic wrap. The benefit of this type of material is that it can be painted over to match your existing frame and will keep out snow and rain too.
No matter what material you use, it's important to press the glaziers points into the seam where the putty meets your frame. These will hold the new glass in place and help it adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.
Condensation
If you have a problem with condensation, it is best to contact your window manufacturer. Many have warranties and guarantees to address these issues. Fogging or condensation on the windows' panes is a sign that the seals are damaged. Only an expert can fix this issue by replacing both panes.
It's a complicated process that requires special tools to remove and replace the window. A professional can do this job and provide the tools. Using these tools can be dangerous, however, so it is always recommended to leave this kind task to an expert.
If you decide to do this yourself, ensure you wear safety glasses and gloves to protect yourself from any broken pieces of glass that could fly off during the process. It is also essential to remove all putty and metal glazing points from the grooves in which the new window will go. Wire-brushing the frame or vacuuming a damp cloth is also recommended. After the frame is dry and clean then you'll need get a replacement glass that is 1/8 inch shorter in each direction than the window that you have and then fit it in the grooves.
You will need to apply a layer silicone caulk into the grooves of your frames to ensure that your new glass is properly installed. Once the caulk has dried and is dry, you must smooth it out and make any adjustments needed. The wood molding will then be reinstalled.
Double-glazed windows may be difficult to open and close when the weather is extremely changing. Extreme temperatures can cause the frames to shrink or expand and cause them to fall or stick. You can try wiping down the frames with water and then lubricating them if this is the case however it is better to seek help from the company who installed your windows.
Misunderstood
When moisture gets trapped between the glass panes, it can cause misted double glazing. Double glazing is made up of two panes which are separated by a space filled with argon for better thermal efficiency. This creates a airtight seal that keeps warm indoor air inside, and cold air outside.
The seal could become damaged over time and moisture may build up between the panes of glass which can cause them to turn to appear misty. This happens because the gap between the panes gets heated by the sun, which causes water vapour to build up in it.
This is a natural process however if it occurs between the panes of the window it can be a problem because it won't be able to control the temperature inside the room. Instead the temperature outside of the window will influence the temperature inside. Northfield Glass can help you if your double-glazed windows start to mist.
We can replace the blown sealed unit without needing to replace the whole window, which is a lot less disruptive than a full replacement. Our misty window repair involves taking off the glass unit, cleaning it, and replacing it with a fresh one to make an watertight seal.
There are companies within the industry that claim to drill holes in your windows that are misting and inject chemicals into them that claim to eliminate fog condensation but we do not recommend this method. This method isn't just unsightly but could also damage the toughened glass, leaving you with a window that doesn't function properly.
It is essential to address the problem as soon as possible, as left untreated, it could result in the growth of mould, which not only damages the window, but also poses health risks to your family members. The moisture in the window may also lead to other problems with your property such as damp or rot. In some instances, it may be necessary to replace the entire window.
Blown or failed
Double-glazed windows are comprised of two panes of glass with an air or inert between them. This increases their thermal efficiency by keeping heat in and cold out. Over time, the gas can become depressurised and cause many problems.
Condensation between the panes is among the most common. It's not a sign of a failure in the window, but it could be a sign you should replace the windows. Condensation can be a sign your double glazing has broken, in which case it will need to be replaced completely.
Double-glazed windows may also cause drafts. This could be because of a failed seal or a damaged handle or a damaged lock. window repairs near me is crucial to address this problem as soon as you can. A draught will cause you to pay more for heating. You can test the seals by rubbing around the edges of the window frame to see if you feel any cold air.
Another indication that your window seals have failed is when you start to notice water beads on the inside of your windows. This is an indication that you need to seal your double-glazed windows.
Your window frames are made to move a bit, as they need to do in order to keep the glass sheets in the right place. However, over time this particular packaging material will get compacted, and this could break the all-important seal. This will allow air to circulate between the panes, and decrease the energy efficiency of your window.
Double glazing that has ruptured an air seal is a sign of failure and needs to be repaired as soon as is possible. A blown seal will prevent your double glazing from performing its primary function of keeping the cold out and warm inside. A blown seal can also let moisture in your home, which could result in mold and other unpleasant conditions. It is recommended to contact a double glazing repair specialist immediately if you notice a blown seal in your double glazed windows, as they are able to replace the whole unit.
