Saab owners have to follow a series of specific steps to add an additional ignition key. It requires dealer support using a handheld computer dubbed Tech-2. Then it is necessary to purchase a new transponder. key must be purchased.
It is an excellent idea to rotate your keys in order that one doesn't wear out faster than the other. This will also keep your keys in top shape.
Replacement Case
Contrary to the classic Saab keys of old keys, the modern key fobs are equipped with electronics which makes it difficult to copy. This has made theft of cars a lot more difficult than it was a few years ago. It also makes it more expensive to replace keys lost.
Saab 9-3 owners should have two keys working. If one of them is lost, it costs a lot of money to replace it in the vehicle because it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are ways to cut down on these costly costs. Certain parts suppliers will utilize the code of a spare key to cut a new metal blade at a fraction the price of the dealer. The key must be the exact same as the original for it to work in your vehicle.
You can also change the case yourself by following these steps. You'll need a flathead and patience. With the screwdriver, break away the plastic and take out the emergency key. After the case is open take the electronics out and put them in your new case. Put the correct key and badge inside the case.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable component that can be replaced quickly and easily. This YouTube video by Cyclone Cyd shows how to replace the remote fob battery with just four simple steps. This tutorial can be used with any modern Saab key fob. However, the process might differ slightly.
The button is typically located near the Saab logo on the back of the fob. The button is usually found on the back of the fob right next to the Saab Logo. Then you will need the flathead screwdriver to insert into the small hole in this button. This will allow you to open the case of the fob to allow you to replace the battery.
Once the new CR1632 battery is installed You can then reassemble the remote key fob and program it to your car. The whole process should take more than an hour, if not less. It is a simple process that does not require any special equipment.
The procedure is a little more complicated in the event that you lose your key, but it is possible. The dealer needs to first determine the VIN of the vehicle, and then purchase an additional TWICE module and key blade with the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Key Replacement Fob
The key fob is a device that locks and unlocks your car. It has a battery inside. Batteries are able to last for a short time and eventually die. This is a regular issue that happens with all cars and the good thing is that you can change the batteries in most key fobs and not have to replace the whole case. You can buy fobs replacements on Amazon that come with all the electronic components already installed, which means you can simply open the case and replace the batteries that were in the case. You will need to remove the emergency key before you can replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle. Move the screwdriver around the case until it will split open, making it simple to take it out.
When you are ready to replace the keys ensure you have a spare, because this can cut down the total cost by a substantial amount. If you have spare keys, you can request that the dealer cut a new key and program it to your car, which is cheaper than replacing the whole key fob.
If you do not have a spare key one, you can add an additional key to your car, but it requires a lot of research and effort. Adding a second key costs a few hundred dollars, and it also requires programming of the car's computer. This can be accomplished by a professional, but it is an expensive option for the majority of owners.
Replacement Ignition
In contrast to earlier Saab automobiles, the current SAAB 9-3 models are equipped with an advanced alarm system that is built on a key code. This means that should you lose only one working key, adding another one can be very expensive as the car has to have a computer module fitted and must also be specifically programmed to accept an additional key. saab 93 key fob can charge hundreds of dollars to program a new key even if they're unable to complete the task.
Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) when you lose your only functioning key. We can reprogram the EEPROM of your car's computer to make it ready for an extra key. This will save you more than 50% of the cost you have to pay a dealer.
If you have owned a 9-3 from SAAB for many years, you know that the ignition keys are not very durable. If your ignition key isn't working properly, you should look into replacing it. They can become very sticky and the buttons can fall off. Luckily, replacing the ignition key isn't as difficult as it seems, and it is fairly easy to do using the proper tools.
