Saab owners must follow a set of specific steps to add a second ignition key. It requires dealer assistance using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key need to be purchased.
Rotate your keys to stop one from wearing out quicker than another. This will also help keep your keys in top condition.
Replacement Case
Unlike the classic Saab keys of old keys, the new key fobs contain electronics that make it difficult to create a duplicate. This has made stealing cars significantly more difficult than 20 years ago. It also makes it more costly to replace keys that were lost.
Saab 9-3 owners must have two keys working. It's expensive to replace a lost key, as it requires replacing the CIM module, and changing the locking cylinders. Dealers usually charge between $100-$200 for this.
There are several ways to get around the high price. Certain parts suppliers will utilize the code of an extra key to cut a new metal blade for a fraction of the price of the dealer. The key must, however, be identical to the original in order to function within your car.
You can also replace the case yourself by following these steps. You will need to have an open-faced screwdriver and patience. With the screwdriver, break off the plastic and then remove the emergency key. After the case is open remove all electronics and put them back in the new case. Make sure you put the correct badge and key back into the case, as well.
Replacement Battery
The replacement battery for the Saab 9-3 is a low-cost part that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd, a user on YouTube, explains how to replace the battery of the remote key fob in only four steps. This guide should work with any modern saab key fob, however, the procedure may differ slightly.
The button is normally located next to the Saab logo on the back of the fob. This button is usually located close to the Saab logo on the back of the fob. Next you will need the flathead screwdriver to insert into the small hole in this button. This should be enough to open the case to allow you to change the battery.
After you have installed the new batteries CR1632, it is possible to reassemble your remote key fob. You can then program it into your car. The whole process should not exceed an hour. It's a simple procedure that doesn't require special tools.
The process can be a bit more complicated if you've lost your key, but it is possible. The dealer will first need to read the VIN of the vehicle and then order a replacement TWICE module and key blade that has the correct unique code. After that, they will have to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car. It has a battery inside. The batteries are able to last for and eventually expire. This is a common problem that occurs with all vehicles and the good news is that you can replace the batteries in a majority of key fobs without having to replace the whole case. You can purchase replacement fobs on Amazon that include all the electronics already installed, so you can just pop open the case and replace those batteries that are old. It is important to keep in mind that you'll need to take out the emergency key first. you can accomplish this by inserting the small screwdriver flathead into the slot found in the middle of the case. The case will split as you turn the screwdriver around it.
If you are about to replace the keys, make sure you have a spare because this can cut down the total cost by a substantial amount. If you do have a spare, you can request that the dealer cut the new key and program it to your car, which is much cheaper than replacing the entire key fob.
It is possible to add another key to your vehicle in the event that you don't have one, however it requires an extensive amount of research and work. It can cost a few hundred bucks to add a second car key. The computer in the car must also be programmed. This can be accomplished by a professional, but it's a costly option for the majority of owners.
replacement saab key -3 uses a more sophisticated alarm system built around a key code. This means that when you lose your sole functioning key, getting another key can be extremely expensive as the car has to have a unique computer module installed and it also must be specially programmed to accept a new key. Dealers can even charge hundreds of dollars to program a new key even if they're unable to do it.
Dealers will charge you a premium to replace your car's computer (also known as the CIM or SAAB twice) if you lose your only working key. Instead we can reprogramme the EEPROM of your current car computer to make it ready for a new key, which will save you more than 50% of the price you be charged at a dealership.
If you've been a long-time owner of an 03-11 SAAB 9-3, then you probably are aware that the ignition key isn't really all that durable. They can become extremely sticky, and the buttons are known to be ripped off at times It is recommended that you consider buying a new one if the one you have isn't performing as it should. Luckily, replacing the ignition key isn't as difficult as it seems and can be done in a short time with the appropriate tools.
