Saab owners who lost a key to their car could be concerned about the cost and inconvenience of purchasing an additional key. There is a way to avoid these expenses by making your own key fob.
You'll need a flathead phillips screwdriver to do this. Place the screwdriver flat in the slot in the middle of the case, and then slowly lift it.
Cost
Some used cars only have one key, while most SAABs come with two keys. In this situation the owner will need to purchase a new key. This can be expensive. There are a lot of ways to save money on this procedure. If you're only looking to replace the key fob case and not the badge or emergency key You can save money by purchasing a used case from dealerships. These cases do not have the emergency badge or key, and they are prone to wear out quickly.
You must also pay for the installation and programming of the TWICE module. These costs can quickly mount up particularly if you have no spare key.
In this regard, it is essential that you always have at least two keys to your car. In this way, if you lose the only working key you won't end up without transportation.
It's not as difficult as it appears to add an additional key from the Saab 9-3. The only problem is that you must connect the key to the car's computers. This can be accomplished by an authorized dealer, but it may take some time to schedule an appointment. You will find all the information you require on the internet to guide you through the procedure.
Installation
Most Saab vehicles manufactured after 1995 come with an immobilizer system that uses the key fob to control the engine. This system also controls doors' locks as well as the remote functions for the car. It is important to have a spare key in order to keep from losing the original and causing your car to be stolen. The good thing is that should you lose your primary working Saab key, there are ways to get it replaced without having to pay for the expense of a dealer service.
First, you need to prepare the new keyfob. You can do this by using the flathead screwdriver for prying the case open. Inject the screwdriver into a tiny slot that is located in the center of the case, then gently work the screwdriver. If you're having trouble, try using different angles. Once you've opened your case, you can take out the electronics and put them in a fresh fob case.
Once you have the replacement fob as well as the key, you can begin the process of programming. You'll be required to connect your Tech2 and follow the instructions for the NG 9-3 (with or without a key). It is recommended to use a replacement TWICE unit that is already connected to the correct key using an transponder. You can find the unit online, but you should make sure that the replacement is an OEM part.
Programming
In general, adding an additional key for Saab 9-3 requires a special tool called a Tech 2. It also requires programming the vehicle to recognize the new keys. This is a far more complex process than just copying a key made of metal. It must be performed by a professional to avoid damaging the electronic system of the vehicle. It is recommended to insert a spare car key as soon as you can. Waiting could lead to higher costs in the future.
In addition to adding an alternative key, you'll have to replace the TWICE or CIM module. It's a postal process and is not something you can purchase from an aftermarket vendor. The cost of a new car can be high, depending on the car model.
There's saab key battery to the dealer charging you top price to replace your car computer. S.A. Locksmith Security can RE-Program the EEPROM in your Saab computer and prepare the vehicle for the new key, saving you the cost of a brand new car computer! This service is quick, easy and cost-effective. It can save you up to up to 50% or more when compared to the price a dealer would charge you! This is an excellent solution for those who have lost their keys.
Remotes
The Saab 9-3 Viggen is one of the most unique cars ever to sport the Saab badge. It was a Scandinavian, front-drive, fighter jet-inspired machine that was fast as a nut and fun to drive. Many other Saab models came out, but not all were as eccentric.
If you own a Saab 9-3, and lose the key fob, it's crucial to replace it as soon as possible. As opposed to the more usual European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a distinct key to activate. If you have a spare, the process of replacing it is simple. If you don't have one it can be expensive and time-consuming.
You can save money if you purchase a used key fob replacement and have it programmed locally by a locksmith. But, be wary of purchasing used keys on eBay and other online stores. They might not be genuine and you may end having to pay more in the end.
Anyone can take out the electronics and battery of an old key fob using an inexpensive screwdriver with a flat head. Just be careful not to cause damage to the small electronic components in the case. Avoid pouring liquids inside the case since this could cause damage. It is also recommended to avoid buying duplicate keys from aftermarket sellers, as they may not have been connected to the CIM on your car.
