uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.
For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.
It's a great idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to fix the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is substantial, you may prefer a security screen that also has a window. This will provide the best of both.
2. Sagging
Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could be affected by a variety of issues that include sagging. A sagging window can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from worsening.
To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.
If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.
UPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and then perform an experiment fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.
3. Water Leaks
If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously might need to be removed before a new layer of caulk can be applied. When it comes to uPVC repair, you should avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.
It is important to check that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.
Mold spots and rotten sills are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open with ease It could be hinges at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Like any mechanical component hinges will be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you to hold the frame.
It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.
Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a picture through our website can often resolve the problem. We are happy to offer suggestions.
Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.
5. Draughts
Draughts in upvc windows can be caused by a variety of different things. The hinges can also be misaligned due to wear, which can cause gaps where the sash and frame meet. If they are damaged beyond repair, it might be required to realign them. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it's possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.
The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the possibility of draughts.
The final method to cut down on draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking cold air.
window repair can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognize that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than fix them. If you are experiencing issues with your upvc window you should consult a professional as soon as you can.
