Double glazing is an energy efficient investment that prevents heat loss in the winter and helps to keep your home cooler in the summer. Repairing your double-glazed windows whenever necessary is a great way to keep them in good condition.
Over time condensation and misting may impact your double-glazed windows. Double glazed windows can be difficult to open and close.
Broken Panes
A stray baseball, a flying pebble from your lawnmowers, or even a severe storm could break the double panes of your windows, leaving your home exposed to the elements. Although a window that is cracked can be difficult to fix however, you don't have to replace it completely. In fact, the insulated glass between the two panes is still in good condition and you can repair your double-pane window with a little DIY effort.
First, you'll need to remove any broken glass from the frame. This is messy work and you'll need to be careful to stop glass shards from falling on the floor or slipping out of the frame. Make sure you wear work gloves to shield your hands from injury and a cloth to protect the area around the broken glass to avoid further breakage or cuts. After removing the broken glass, carefully clean the entire frame of the window to get rid of any remaining sealant or debris. Sand rough areas of the frame to create a smooth surface on which to put in your new glass.
Once the frame is cleaned and dried, you can apply a new layer of glass to the place in which the broken pane was removed. This is the best way to protect and seal your window. window repair can also reduce your energy bills by preventing drafts and water from entering the home. Next, you will need to choose the right glazing material. Some options include clear tape, which is a bit more robust than regular tape and will keep your window safe from further cracking, as well as glazing film that resembles clear plastic wrap. The advantage of this choice is that it can be painted to match the frame you have and will also keep snow and rain out as well.
Regardless of the material you pick regardless of the material you choose, it is essential to press glazier's points into the place where the putty joins the frame. They will help hold the glass in place, and help it adhere to the frame. Hardware stores carry glazier's point ropes that can be rolled out on the frame rabbets.
Condensation
If you're experiencing problems with condensation, it's best to contact the window manufacturer. Many companies offer warranties and guarantees to cover these issues. Fogging or condensation on the panes of your windows is a sign that your seals are damaged. Only an expert can fix this issue by replacing the panes.
It's a difficult process that requires special tools to remove and replace the old window. A professional can complete this job and provide the equipment. It is recommended to leave the job to a professional. These tools could be risky.
If you choose to do this yourself, be sure to wear gloves and safety glasses to shield yourself from any broken pieces of glass that may fly off during the process. It is essential to remove all putty or metal glazing points from the grooves that will be receiving the new window. Wire-brushing the frame or vacuuming it with a damp cloth are also recommended. Once the frame has dried it is time to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Make sure the glass fits into the grooves.
Depending on your frames You will then have to apply the caulk on the grooves to ensure that your new pane is securely in place. After the caulk is dry it is time to smooth it out and make any adjustments needed. The wood molding can then be put back in place.
If the weather abruptly changes, double-glazed windows may become difficult to open and close. Extreme temperatures can cause frames of double-glazed windows to expand or shrink, causing them to become sagging and stick. If this is the case try wiping the frames with water and then lubricating the joints. However, it may be best to ask the company who installed your windows for assistance.
Misunderstood
When moisture gets trapped in between the glass panes it can cause misted double glazing. Double glazing consists of two glass panes that are separated by an insulating area, typically filled with argon gas to provide increased thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside and allows you to keep your temperature in your home comfortable.
The seal may fail over time, and moisture can build up between the glass panes and cause them to become to become cloudy. This occurs because the sun heats the gap between the panes of windows, causing water to evaporate.
This is a natural occurrence, but if it occurs between the panes of the window it could cause problems because it won't be able control the temperature in the room. Instead, the temperature outside the window will affect the temperature indoors. Northfield Glass can help you when your double-glazed windows begin to fog.
We can replace a single blow sealed unit without the need to replace the entire window. This is much less disruptive than a full replacement. Our misty glass repair involves removing and cleaning the glass unit before replacing it with a brand new one. This will result in an airtight seal again.
Some companies in the industry claim that they can inject chemicals through holes drilled into windows with mist to remove the condensation and fog. We don't recommend using this method. This is not only ugly, but it can cause damage to the toughened glass and can leave you with a window that does not fully function.
It is crucial to resolve the problem as soon as you can, as if untreated, it could lead to mould growth which can not only damage the window, but also poses health risks for your family members. Moisture can cause other issues within your home, such as dampness or rot. In some instances windows, they may have to be completely replaced.
Failed or blown
Double-glazed windows are made up of two glass panes with an air or inert between them. This increases their thermal efficiency by keeping heat in and cold out. Over time, this gas may depressurize which can lead to a range of problems.
Condensation in between the panes is one of the most frequent. While it is a natural occurrence and doesn't mean that your window is failing however it could be an indication that you need to re-seal your windows. Condensation may be a sign your double glazing is damaged and, in that case, it will need to be replaced completely.
You should also look out for draughts coming from your double-glazed windows. This could be because of the seal being damaged or handle that is broken, or a broken lock. A draught is noticeable and will lead to higher heating bills Therefore, it is essential to get it fixed sooner rather than later. Check the seals around the window frame by smelling cold air.
Another sign that your window seals are failing is when you start to see water dripping on the inside of your windows. This is a clear indication that you will need to re-seal your double glazed windows.
Your window frames have been designed to move a bit and this is essential to keep the glass sheets in position. Over time, this special packaging material can become compressed. This could cause the seal to become broken. This will allow air to flow between the panes and reduce the efficiency of your window.
Double glazing that has ruptured an air seal is a sign of failure and should be fixed as soon as possible. A blown seal will prevent your double glazing from fulfilling its primary job of keeping the cold out and warm inside. Furthermore, a blow-off seal will let your home's moisture in, which can result in mold and other unpleasant conditions. It is recommended to contact a specialist in double glazing repair immediately if you spot a damaged seal on your double-glazed windows, as they can replace the entire unit.
