Volkswagen offers a practical way to add a spare key or replace one that has was not working. With a few simple steps, the process is simple and inexpensive.
The first step is to find the correct key fob. It should have a keyblade that can be flipped out or inside the keyfob. Collect all the necessary documentation to prove ownership. Then, visit the locksmith or dealer.
Immobilizer
The immobilizer is a device used to prevent keys that are damaged, or unauthorized, from getting the vehicle started. The system recognizes a specific chip on each key. VW dealers or automotive locksmiths are able to program additional keys. However the process requires tools and software. Utilizing the appropriate tools will guarantee a smooth experience when programming. Technicians should try to reproduce the issue prior to beginning key programming. They should also check the vehicle for fault codes, check for technical service bulletins (TSBs), and test the battery within the key fob.
Volkswagen keys that don't have programmed immobilizer chips shut down the engine after a few moments of cranking. The immobilizer chip will not prevent the alarm from turning on or unlocking doors. The key fob's immobilizer is an additional component that is attached to the flip side of the car key. It needs to be programmed into the car's computer in order to work.
Making a new key for an VW is more expensive than creating duplicate keys when the original keys are lost. The key must be purchased from the manufacturer, and then undergo an specialized programing process in order to sync up with the computer in the car. This can be done by a professional using a program such as VagTacho and VCDS. This method is ideal for vehicles that have the older Immobilizer 2 system and earlier.
Electronic Ignition
The electronic ignition feature of the key is an essential element of the anti-theft technology in vehicles. The feature is activated when the key fob is inserted in the ignition. However, it is not completely foolproof. It is susceptible to failure, which can result in the engine in your VW not being able to start. This could be due to a variety of causes, including defective key programming or a defective car battery.
Fortunately, you can avoid this issue by having your Volkswagen car key fobs programmed professionally. This process can be completed by a dealer or a locksmith. The cost of this service is different however the most common costs are between $90 and $150. Prices also vary depending on your vehicle's model and year.
You'll require your primary key to program the new VW key fob. The new key must be able for the vehicle to start. This will allow the onboard diagnostics to recognize it as a legitimate key. volkswagen replacement keys warning light will turn off.
Some models require a PIN code that is three to four digits, to enable onboard key programming. Certain models might require a scanner tool. Locksmiths or dealers can make use of a specialized scanner to carry out onboard key programming. These tools are not available for sale at general automobile accessory stores, so you'll have to purchase one or borrow it from the dealership.
Keyless Entry
If your Volkswagen key fob is experiencing battery issues, or you've lost it altogether It's likely that your car will start, but isn't able to unlock. It's a good thing that it's easy to fix the issue. The first step is to check that the key fob is within reach of the vehicle. If it is you are, press and hold the lock button until the lights on the key flash for six seconds.
This resets the key fob's proximity to your VW. You can then unlock the vehicle again by pressing the unlock button on the key fob. If the vehicle won't unlock after this, you'll be required to contact the dealer to have the key programmed.
The procedure of getting a brand new Volkswagen key programmed could be costly. It is crucial to request quotes from multiple dealers before deciding which one is the best choice for you. Also, be sure to determine if the dealer charges for key programming, as well as for the new key itself.
Getting a second Volkswagen key is a good idea for a variety of reasons. You may need a backup in case of theft or loss of your primary key. If you have a spare key and want to program it to ensure it can work with your Volkswagen Here are some simple steps to follow.
Remote Start
Unlike previous generation key fobs that communicated with your vehicle using radio waves, Volkswagen's remote-start systems communicate with your car via secure wireless connections over cell technology. VW Atlas, Jetta or Passat will detect the proximity of your vehicle to activate features such as keyless entry or push-button start. It's as simple as opening the app connecting your smartphone to your car and pressing the button.
Be sure that your Volkswagen is parked, and that the driver's-side door is shut. This will ensure that only the right key is used to access the features of your car. Dashboard displays an error if the key is not recognised. This method is only compatible with newer VW models that are equipped with an RFID sensor ring that is mounted on the steering wheel. These models require an encrypted pin be programmed.
Close the driver's side door and take out the key that is used to create the new keyfob. Then, press the lock button on the new key fob. This will signal to the vehicle that the key is a functional key. Then, it will begin to transmit signals that allow you to open the door to the driver's side and remotely start your vehicle. Some have reported that this only works when there is a clear line of view to the car, however others have succeeded even in parking areas that are crowded.
