When double-glazed window seals are broken they can cause damp and mould. This can cause damage to the frame and wall surrounding it and affect your health.
Fortunately, resealing is a cost-effective method to repair the majority of uPVC window frames than replacing them. A glazier is usually able to clean the frame of the window and the glass and then apply a new layer of sealant and smooth it.
Water Leaks
Window seals are designed to keep moisture from your home. As they wear out, water can get into your windows. A leaking window is not only annoying but it can also cause costly damage to the surrounding structure of your home. It is crucial to spot the problem early and get it fixed by an expert before it gets any worse.
The most common cause of the windows that leak is not the glass itself but rather on the frame and sill. A leak in this area is the most typical indication of a failing window seal. This can be due to damage to the seal caused by weather or aging or worn caulking or even a blocked drain section that results in the accumulation of water or ice.
Another indication of a window seal failing is water appearing between the panes of double-glazed windows. It's not as risky as a leak of water since the water doesn't travel far enough to reach into your home. However, it does indicate that the inert gas sandwiched between the panes has been released, which can reduce the insulating value of your windows.
The final common sign of a failed window seal is condensation between the panes. This could be due to a failed window seal, or it could be the result of the humid climate of your home or an issue with the glass. The condensation might not just be irritating but it can also lead to the growth of mould and mildew within your home, which can be very difficult and expensive to remove.
It's time for you to examine your double-glazed windows if you see these signs. A repair or replacement will ensure your home is protected from water leaks, reduce the cost of energy, and also keep out drafts. It's a minimal cost to provide your family with comfort and safety. Contact Thompson Creek Window to discuss your options for window seal replacement or repair. Our experienced professionals are happy to help! We provide assistance to homeowners throughout the Mid-Atlantic region.
Condensation
A broken double-glazing seal may allow water to enter the insulating space. This water can cause fogging or misting in the window panes.
If you are noticing condensation inside your home you should contact an expert in double glazing repair. Condensation can be an indication that the vacuum seal created by the factory failed and water has gotten into the insulated space.
Condensation can be caused by a variety of causes, but it's usually the result of gaskets that are not properly fitted, sealants or insulation within the uPVC frame of the windows. There are many options for double glazing seal repairs However, it is crucial that the new seals are correctly size to ensure a perfect seal and a perfect fit.
Typically, the gaskets that are used to fill in the gaps between double-glazed units are made from polyurethane foam. These are designed to last for a long time but they are susceptible to deterioration in time because of wear and tear, as well as exposure to different temperatures and weather conditions throughout the year.
Over time the foam can shrink or crack over time. This can lead to cracks in your seal, allowing moisture to seep into the double-glazed window. This can result in condensation and a loss in energy efficiency.
Re-sealing the windows is one way to fix this problem. But, this isn't certain to solve the issue since it will only remove the condensation that has formed, but won't address the underlying issues that are causing your double-glazed windows ' to leak or form condensation.
Another option is to replace your windows completely and this should be handled by a professional who offers an insurance backed guarantee. This means that if the company fails or goes under, you will remain covered by the insurance. It's worth mentioning that the warranty for your replacement windows should be a minimum of 10 years.
Misting
As the fall months get closer it's a good idea to check that your double glazing seals are in good shape. Worn-out window seals don't just affect the insulation properties of your windows, but can also lead to damp, mold and condensation. It is crucial to fix any issues in your double-glazed windows as soon as possible to avoid further damage and save on energy bills.
A typical double-glazed window is constructed from two glass panes that are connected by an internal space that's filled with gas. A layer of sealant on the outside fills in the gap between the uPVC frame and the glass. This is crucial to maintaining the airtight seal that keeps warm and cold air separate in your home, thereby saving the cost of heating. However, over time, these seals will fail due to age and weather conditions, or inadequate installation. The magic insulation formula which makes double glazed windows so effective can begin to degrade as soon as this occurs.
If damaged or faulty seals are not repaired, they can lead to condensation and dampness which can affect your health as as the appearance of your window. Dampness and moisture can cause damage to ceilings, walls, floors and other surfaces in your home. They can also cause allergens and irritants that are harmful to your health as well as the health of your family.
The most frequent issue with double glazing is misting between the panes. This occurs when moisture is able to get into the insulated part of your window. It can be difficult to fix without professional double glazing seal repair.
There are double glazing repairs to tackle this issue, but we'd recommend against this because it's not only dangerous but can be extremely dirty and destructive to your windows. These methods involve drilling holes in your glazed units and using chemicals to get rid of the fog and condensation. This could lead to many problems including exposing your windows to water damage that could ruin the unit completely.
Professional glaziers have the tools, skills and experience necessary to safely seal uPVC frames. They also can offer you long-lasting results. They can also provide tips on how to keep your uPVC window in good condition to avoid problems in the future.
Draughts
A window that is draughty is a sign that the sealant has failed and must be repaired or replaced. This will stop the cold air getting into your home, improve energy efficiency and lower heating bills and make a difference to comfort levels and indoor temperature control.
It is important to keep in mind that not all drafts originate from the window seals but from the gap between the frame and the bricks. In some cases it is possible to fix this by filling the gap with silicone caulking. However, if this method is not successful, the area will need to be resealed professionally.
When the sealant around the double-glazed window begins to degrade, it allows for water infiltration and can lead to dampness or even mold in certain instances. This could have a negative impact on health and could be detrimental to the property. If you notice any problems with water intrusion it is important to address them as soon as possible. If your windows are covered by a guarantee It is worth checking to see if the company that supplied them will be able to cover the cost.
It is important to determine whether the windows are covered by a warranty. Some companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows fall under warranty, it is recommended to contact the company that sold them as fast as you can and inform them about any problems you are having. It is best to reach the company in person, or by letter and email. This will ensure that everything is documented and clear.
It is also worth noting that draughts may be caused by defective hinges rather than a lack of effective seals. The hinges are responsible for closing the window sash (the section that you open) but can become stiff over time if they are not regularly oiled. This could cause a gap to form between the sash frame and the sash, allowing cold air to enter the home. This issue can be fixed by replacing the hinges, without damaging window seals.
