Quality locks on your windows and doors will stop burglars from getting into your home. They generally don't like breaking glass or slipping through open windows.
However, some double-glazing owners have encountered issues with their door or window lock after it was installed. These problems can often be solved without the need to replace double glazing.
Broken or faulty locks
A locksmith can fix your uPVC window lock or door lock if broken or faulty. They will be able to repair the hinges, striker plates and locks on your double-glazed. They can also move the cylinder in order to fix any misalignment that could be causing your handle to work properly.
If the key fits in the lock but doesn't turn or is difficult to insert, the mechanism could be locked up. This can be due to dirt or grime getting stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or Teflon, not oil, because oil attracts dirt and cause it to stick to the inside mechanism. After you have lubricated the lock, you should insert the key and try to turn it. The lubricant should get into the mechanism, and the lock should spin easily.
A faulty lock can also be caused by loose screws within the mechanism of the lock. They can become loose and break off or fall out completely and stop the lock from working properly. A screwdriver can be used to tighten the screws however, caution must be taken not to tighten them too much, because this could cause damage to internal components.
A broken lock can be hazardous for your family and you. This is particularly the case if you have children. They can easily unlock the door without your knowledge, giving them access to your home. If you're concerned that this might occur, a licensed professional locksmith can help secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all kinds of damaged and damaged mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.
Handles that are broken or faulty
As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is a great choice for those concerned with criminals who are looking to gain entry to your home. It's also worth asking your installer about anti-lift blocks that can be installed on top of the locks already in place and help keep your window firmly locked in a closed position.
Highly recommended Web-site 's not uncommon for the handle locks to get damaged or fail - they are the first component of your window that could be forced open by a criminal intent on breaking in. Fortunately, the good news is that this is one of the easiest parts to fix.
Modern handles made of aluminium and uPVC operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to shoot bolt locking systems also as an optional extra on new double glazed window installations.
If a handle is damaged, it's crucial to get it repaired as quickly as possible. A damaged handle could prevent the window from closing properly and allow drafts to get in. It may also be a weak point that burglars who are opportunistic could exploit, putting your belongings and family at risk of being taken.
The process of fixing the failed mechanism starts with gaining access to the frame of the window and then removing the damaged handle. The gearbox is then accessed to determine the type of gearbox that is used to open the handle. This allows to replace the handle that matches the profile and internal window frame mechanisms.
After the mechanism has been replaced the handle can be re-attached using the original screws - but we would recommend replacing them with longer ones as this will give a more secure fit. The final step is to apply a coat of clear sealant in order to protect the handle from further corrosion. After that your window will be functional again and at a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows do not close properly, you could experience draughts, a weakening of your home's security, and an increased chance of damp or water damage. Broken or defective window hinges are a common issue that can be fixed easily.
If you have a uPVC windows that won't close or open and close, it's likely that your hinges are broken or damaged and need to be replaced. Most window companies will require that you purchase an entirely new window unit in order to address this problem, but we can replace the hinges in order to save you money.
Window hinges are often damaged after repeated use, or they may be weakened due to corrosion over time. In the event of a broken hinge, it's important to take steps to prevent further damage by taking care not to push the window to close or open.
The type of hinge you are looking for will help you identify the correct parts to fix it. Maco, Mila and Roto are all manufacturers of window hinges. It's best to consult a professional in this case to avoid the mistake of buying parts that are not compatible with your existing hardware and cause further damage.
The hinges that are not working properly can be a huge issue for uPVC doors and windows. They can be a major source of noise and can also allow water to infiltrate which can damage your windows.
To fix this issue, first make sure whether the pin barrel on both hinge halves is aligned. If not then tap the headpin using a hammer in order to create a slight bend in the hinge barrel. This will keep the pin in place. Ask a second person to hold the door as you take the hinges and hinges from both the doorjamb as well as the door. Replace the hinges with ones that are the same size and install the screws with glue. Finally fix the hinges using clamps or weights while the glue is drying.
Once you have repaired the hinges, you can install the door again. You could also reattach the handle. It is a good idea to replace the screws with the same length of dowels as the original screw so that they are in line with each one.
Glass that is damaged or Faulty
While uPVC windows do a great job of keeping the cold out and heat in, they may become damaged over time. This could include damaged or broken glass and faulty locks. This is an issue that can be very expensive when neglected. It also can detract from the appearance of your home and may lead to a loss of insulation, which is why it's important to repair any damage as quickly as possible.
You can repair the crack in your glass by yourself if you have the proper tools and techniques. Make sure the area surrounding the broken glass is clear of debris, so that shards do not cause injury or trip hazards. Then, take any pieces of broken glass and dispose of them properly. Apply masking tape to the entire area. This will prevent shards of glass from sticking to your skin and splintering when you move them. If you're dealing with a double-pane glass, it's best to prepare the glass before gluing it back in place so that you are sure you'll have enough room to finish the project.
Use a dry, clean cloth to clean the surface of the broken glass and the frame prior to applying the glue. Follow the directions for application and curing times which may differ from one product to the next. You may need to clamp the cracked glass using clamps that are lightweight and designed to support fragile materials, based on the angle.
Once the adhesive has fully cure, carefully insert the glass into the window frame. Make sure it's in line with the frame edge and that there aren't gaps between the glass sash and the frame. Be careful not to bend the glass when you put it back in place because this could weaken the seal. This can lead to condensation or water infiltration.
If you have a glass window that is completely broken or has larger cracks, contact a professional glazier such as O'Brien(r) to organise an exchange. It's essential to act swiftly when you notice broken glass.
