Having quality locks on your windows and doors will stop burglars from accessing your home. They don't usually like to break glass or try to squeeze through windows.
However, some double glazing owners have experienced issues with their door lock or window lock after it's been installed. Fortunately, these issues can be fixed without having to buy new double glazing.
Broken or damaged locks
If your uPVC window or door lock is damaged or broken, then a locksmith can repair it for you. They can repair the hinges, striker plates and locks on your double glazing. They can also move the cylinder around to fix any misalignment issues which could cause the handle to not function correctly.
The mechanism may be locked if the key fits in the lock, but it does not turn or become difficult to insert. The dirt or grease could get stuck in the mechanism. If this is the case it is possible for the lock to be cleaned and lubricated. Make use of a dry lubricant, like graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should work its way through the mechanism, and the lock should be able turn with ease.
Loose screws within the lock mechanism are a different cause of a faulty lock. They may loosen and fall out or break off completely which can stop the lock from working correctly. The screws can be tightened by using the help of a screwdriver. However, be careful not to over tighten them. This can damage the internal components.
A faulty lock can be dangerous for both you and your family members especially if you have young children. It can be easy for them to open the door without your knowledge and thus allow them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can assist you to secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all kinds of defective and broken mechanisms on uPVC windows and doors. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always necessary.
Handles that are damaged or faulty
As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is a great choice for those worried about opportunistic thieves looking to gain access to your home. Ask click hyperlink about antilift blocks. These can be installed in addition to existing locks and can ensure that your windows are securely closed.
It's not uncommon for handle locks to become damaged or even fail - they are the first part of your window to be pushed open by a criminal intent on breaking in. Luckily, the good news is that this is one of the most simple parts to fix.
Modern handles made of aluminium and uPVC operate a multi-point locking system known as Espagnolette which is designed to resist forced entry. This security upgrade is available as an option on new uPVC windows. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional option on double-glazed windows.
It is important to repair handles as quickly as possible if it is damaged. The damaged handles could stop the window from closing properly and permit drafts to enter. It may also be a weak point that burglars who are opportunistic could exploit, therefore putting your belongings and family at risk of being taken.
The process of fixing the damaged mechanism begins with gaining access to the frame of the window and removing the damaged handle. The gearbox can then be accessed to identify the type of gearbox that is used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.
After the mechanism has been repaired, the handle may be reattached using the original screws. However, we recommend replacing them with larger screws to ensure an even more secure fit. The final step is to seal the handle using an opaque sealant. This will help protect it from further deterioration. After that, your window will be fully operational again, and at less than the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows aren't shut properly, draughts can get in, your home's security barriers will weaken, and there is an increased risk of damp or water damage. Broken or damaged window hinges are a frequent issue and can be repaired easily.
If your windows made of uPVC won't close or open it's likely that the hinges need to be repaired or replaced. While most window manufacturers require that you purchase a new window unit to solve this issue We can replace the faulty hinges and save you money.
Window hinges are often damaged by repeated use, or weakening over time due to corrosion. If you find a damaged hinge, it is important to take measures to prevent further damage by being careful not to push the window open or closed.
The type of hinge you are looking for will help you find the right parts to repair it. The most commonly used types of window hinges include Maco, Mila, Roto and many other brands. It is recommended to consult an expert in this regard to ensure that you don't make the mistake of buying parts that aren't compatible with your current hardware and could cause further damage.
A damaged hinge can be a big issue for your uPVC windows and doors. They can be a significant source of noise and also allow for water infiltration that can cause damage to your windows.
Verify that the pin barrels on both sides of the hinge are aligned. If it isn't tapping the headpin, use the hammer to make an incline in the hinge barrel. This will help keep the pin in the right position. Have a person hold the doors as you take off hinge screws and hinges. Replace the hinges with ones that are the same size and then attach the screws using glue. Finally fix the hinges using weights or clamps while the glue sets.
After you have repaired the hinges, you can put the door back in place. You can also attach the handle. Replace the screws with wood dowels that are the same length as the screw that was used to ensure they are in line.
Discover More Here or faulty glass
While uPVC windows do an excellent job of keeping cold out and warm in, they may become damaged over time. This can be the case with broken or damaged glass as well as defective locks. This is a problem that can be costly if neglected. It also can detract from the aesthetics of your house and could lead to a loss of insulation, so it's crucial to repair any damage as quickly as you can.
If your glass has cracked but not shattered it is possible to fix it yourself using the right tools and techniques. Make sure the area around the broken glass is clear of debris so that any pieces of glass do not cause injuries or cause a trip hazard. After that, take away the broken glass pieces and dispose of them in a proper way. Then, place masking tape to the entire area to prevent shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to adhering it to the wall is a good idea in the case of windows with two panes. This will ensure you have enough room to finish your project.
Before applying the glue clean the surface of the broken frame and glass with a a dry, clean cloth. Follow the instructions for application and curing times that can differ from one product to the next. Depending on the degree of the crack you may want to hold the glass to hold it in place while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.
Once the adhesive is fully cured, carefully reinstall the glass in the window frame, making sure it's flush with the edges of the frame, and there are no gaps between the glass and the window sash. Avoid bending the glass as you install it again, as this could weaken the seal. This can lead to water infiltration or condensation.
If you have a glass door that's completely broken or has larger cracks, consult a professional glazier like O'Brien(r) to organise the replacement. It's important to act quickly in the event of broken glass.
